Finally a complete, "in-tank" fuel system that is truly universal with the ability to support big power. The Aeromotive Eliminator Stealth Fuel Cell is an all aluminum fuel cell with an Aeromotive Eliminator Fuel Pump and Filter, built right into the cell itself. Just like any fuel cell, these can be mounted any where, in any car. Simply strap the fuel cell in, hook up your fuel line to the pump outlet and your two wires and you're done. No more searching for a place to mount your fuel pump and pre-pump filter. The Aeromotive Eliminator Stealth Fuel Cell gives you an advantage over any traditional fuel system setup. Through an innovative baffling system inside the cell, the fuel pump inlet always has a constant column of fuel. In addition, the baffling keeps fuel at that same point even during extreme driving conditions, making it perfect off-road vehicles, drag racing, even autocross and drifting. This feature alone ensures the longevity and driveability of your fuel pump. Plus, the pump is inside the cell, so noise is drastically reduced and the fuel pump runs cooler longer. The Eliminator Fuel Cell is designed to be ideal for both EFI and Carbureted applications for street driving or racing, even if its forced air induction or naturally aspirated. The proper regulator is required depending on your application. For Carbureted applications, use Regulator, P/N 13202. For EFI applications, use Regulator, P/N 13110. All Aluminum Construction, Tig Welded Natural Finish. 20 Gallon Capacity, 20" wide x 24" long x 10" tall, Flush Mount Lid Assembly. (2) AN-08 Rollover-Proof Vents Universal 0-90 Ohm Fuel Level Sending Unit AN-08 Return fitting for bypass line from regulator Built-in 100-micron Stainless Steel Pre-Filter Aeromotive Eliminator Fuel Pump with capability to support: Fuel Injected Engines: up to 1900 HP - naturally aspirated up to 1400 HP - forced air induction Carbureted Engines: up to 2300 HP - naturally aspirated up to 1700 HP - forced air induction Aeromotive 11104 Eliminator electric fuel pump. The Aeromotive Eliminator fuel pump is designed for high horsepower forced air induction machines on the street and at the track. The Aeromotive Eliminator gives you about 25% more flow at pressure compared to the Aeromotive A1000 fuel pump. Proprietary aerospace composite technology is built into the dual chamber pumping mechanism. Pump flow exceeds 800 lbs. per hour at 13.5 volts and 45 PSI. Pump flow exceeds 1000 lbs. per hour at 13.5 volts and 8 psi. Note: Does not include mounting straps. |
| We welcome CANADIAN customers! For ordering information, click on "Orders To Canada" at the top left side of this page. PAYMENT METHODS: PayPal, Visa, Mastercard, Discover, American Express, money orders.  |