Click to enlarge

Ford Small Block Harmonic Dampers

Professional Products 80007 PowerForce harmonic damper balancer.

Fits 1981-1995 Ford 5.0L, 302, 351W engines.

Made to the short 3" length. This allows the use of a 5.0L engine with a 50 oz. damper to be used in an early chassis where front clearance is at a minimum.

To fit this damper to late model vehicles, Professional Products offers a optional series of spacers to provide the correct fron pulley alignment.

Three sets of timing marks and both 3 and 4 bolt accessory pulley bolt patterns are used.

The plastic insert shown in the photos above can be used to center the 3 bolt pulleys with a female pilot, or it can be removed to accept 3 bolt pulleys with a male pilot.

Great for high performance street cars or stock replacement use.

Measures 6.4" in diameter.

Weighs in at 10.06 pounds.

Made of nodular iron painted semi-gloss black with white etched timing marks.

Elastomer is bonded to the hub and ring for durability. Less than .005 runout.

SB Ford Spacer Information - Professional Products SB Ford Dampers are all made to the 1963-'69 length. This allows the use of both early and late style dampers in early chassis.

All of Professional Products SB Ford dampers also have both the three and four bolt pulley patterns.

They also have three sets of timing marks to suit all SB engines. If your stock damper is longer than three inches, Professional Products make up the difference with a series of spacers.

To determine which spacer you need, measure the length of your damper and refer to the chart above to see which spacer you need.

Professional Products standard spacers are made of aluminum and are very inexpensive. If you have a 5.0L engine running a belt driven blower, Professional Products recommend that you use their 81009 Steel Spacer instead of the 81007 aluminum one.

Professional Products 80007 90007 PowerForce Plus Harmonic Damper 1981-1995 Ford 5.0L 302 351W harmonic damper balancer 80007$99.97

Click to enlarge
Professional Products 90007 PowerForce Plus

Professional Products 90007 PowerForce Plus harmonic damper balancer.

Fits Ford 5.0L engines.

A SFI-Spec racing harmonic damper that also works well in hot street engines.

Made of 1045 steel.

Weighs in at 11 pounds.

6.4" Diameter.

High temperature elastomer is used, bonded to the hub and ring.

Number 8-32 stainless steel machine screws are used for plate retention.

NOTE: See chart and tech notes above to select a spacer if needed.

90007$199.97
Click to enlarge
Professional Products 81007 Ford damper spacer

Professional Products 81007 harmonic balancer spacer.

For use with Professional Products small block Ford balancers.

See chart above to select the correct part number for your application.

81007$26.97
Click to enlarge
Professional Products 81008 Ford damper spacer

Professional Products 81008 harmonic balancer spacer.

For use with Professional Products small block Ford balancers.

See chart above to select the correct part number for your application.

81008$26.97
Click to enlarge
Professional Products 81006 Ford damper spacer

Professional Products 81006 harmonic balancer spacer.

For use with Professional Products small block Ford balancers.

See chart above to select the correct part number for your application.

81006$24.97
Click to enlarge
Professional Products 81009 damper spacer

Professional Products 81009 steel damper spacer.

For use with blown 5.0L Fords.

Utilize this spacer instead of the standard 81009 aluminum spacer on a 5.0L Ford engine with a belt driven supercharger.

81009$26.97

PayPal Acceptance Mark




We welcome CANADIAN customers! For ordering information, click on "Orders To Canada" at the top left side of this page.

We will not ship to freight forwarding - expediting companies.

PAYMENT METHODS: PayPal, Visa, Mastercard, Discover, American Express, money orders.

ecommerce provided by Yahoo! Small Business