Click to enlarge

Holley 0-80870 870 CFM Street Avenger Carburetor

Holley 0-80870 Street Avenger 870 cfm carburetor is wet flow tested by skilled Holley craftsmen.

This Holley carburetor is specifically designed for street cars.

Street ready, right out of the box for stock or mildly modified engines. Some modified engines may require tuning such as jetting or power valve changes.

The Holley 0-80870 Street Avenger carburetor is designed for "square bore" intakes such as Edelbrock, Offenhauser, Weiand and Holley. GM Quadrajet intakes require a carburetor adapter.

The Holley 870 cfm Street Avenger carburetor features adjustable vacuum secondaries.

Dual inlet fuel feed.

Easy to use electric choke.

Four vacuum ports.

Built in secondary fuel filters.

The Holley fourth generation power valves provide maximum blowout protection.

The Holley Street Avenger carb provides precise fuel metering for monster low end torque, awsome acceleration and unmatched top end horsepower in a street carb.

Adjustable air-fuel idle for smoother idle qualties.

Installation instructions and hardware included.

HOLLEY 0-80870 Holley Street Avenger 870 CFM carburetor 0-80870$399.98

Click to enlargeHolley 0-80870 Street Avenger fuel line
We recommend this fuel line for use with the Holley 0-80870 Street Avenger carburetor shown above. Inlet features built in hose barb for use with 3/8" hose and a 1/8" NPT port for attaching a fuel pressure gauge. Chrome plated.

6TD-2197$25.99
Click to enlargeHolley 0-80870 carburetor fuel line and gauge
We recommend this fuel line upgrade with fuel pressure gauge for use with the Holley 0-80870 Street Avenger carburetor. This fuel line is not only great looking but is very functional.

Incorporates a small, convenient 1 1/2" diameter fuel pressure gauge that reads 10-15 psi. The gauge is designed to read in 1/2 pound increments.

Line inlet features a versatile 3/8" NPT thread. Includes a 3/8" hose barb. Easily adapted to AN fittings.

6MRG-1559$59.95
Click to enlargeHolley 0-80870 carburetor braided fuel line
We recommend this fuel line upgrade for use with the Holley 0-80870 Street Avenger carburetor.

Made from aircraft quality buna-N neoprene hose encased in braided stainless steel, this fuel line kit is temperature, gas and oil resistant. The fuel line is adjustable between the carb bowls from 7 1/2" to 11 1/2".

Includes a 1/8" pipe fitting for use with a fuel pressure gauge. Exits with a versatile, user friendly female 3/8" NPT fitting for use with hose barbs or pipe to AN fittings.

6EDE8101$69.99
Click to enlargeHolley 0-80870 carburetor throttle return springs
We recommend this dual throttle return springs for use with the Holley 0-80870 Street Avenger carburetor shown above.

Universal in design and engineered to provide positive throttle return for increased safety. Inner and outer spring are Electro-Nickel bright plated to resist rust. Includes chrome-plated bracket that attaches to the drivers side, rear carburetor mounting stud. This spring kit can also be used with many different throttle cable bracket designs.

6MRG-19$10.99
Click to enlargeHolley 0-80870 fuel line pump to carb
A carburetor to fuel pump -6AN fuel line kit for use with the Holley carburetor shown above when when -6AN dual feed fuel lines are used (shown above) are used.

Includes -6AN fittings and a 24" long braided stainless steel hose. Connects with mechanical fuel pumps with 3/8" NPT outlets. Comes pre-assembled.

Makes for a very professional and durable installation. Its all done for you!

33E-8123$49.99
Click to enlargeHolley 0-80870 heat insulating base gasket
A carburetor heat insulating divided base gasket. Designed for use with the Holley carburetor shown above.

Extra thick, .0320 to insulate the carburetor from heat to provide a cooler, denser fuel mixture for more power.

While the Holley carburetor shown above comes with a thin base gasket, this extra thick heat insulating gasket allows the carburetor to run cooler which provides a denser fuel mixture for more power.

Available either as a divided gasket (#9266) for use with dual plane intake manifolds and an open center gasket (#9265) for use with single plane intakes. Find your style in the applications drop down box.

Includes longer carburetor mounting studs to provide for the additional thickness of the gasket.

33E-9266-9265$22.99APPLICATIONS:: 
Click to enlargeChevy small block throttle cable bracket
Provides a Chevy mounting bracket for the throttle cable, Turbo 350 kickdown cable and cruise control cable. Designed for use with the Holley carburetor shown above. Fits Chevy small block. All three positions are fully length adjustable. Mounts to the back intake manifold bolts on the drivers side of the engine.

Super sturdy, heavy metal design with a durable gold iridited quality finish.

33E-8036$31.99
Click to enlargeChevy small block chrome throttle bracket
Chrome throttle cable, Turbo 350 kickdown cable and cruise cable bracket. Desgined for use with the Holley carburetor shown above. Fits Chevy small block. All three positions are fully length adjustable. Mounts to the back intake manifold bolts on the drivers side of the engine.

Super sturdy, heavy metal design with attractive chrome show car quality finish.

33E-8030$49.99
Click to enlargecarburetor mounted throttle bracket
GM throttle cable, Turbo 350 transmission kick down cable bracket. Designed for use with the Holley carburetor shown above. All positions are fully length adjustable. Chrome plated. Mounts to the drivers side rear carburetor mounting stud. Easy to install and make for a clean installation.

33S-24283$22.99
Click to enlargeGM throttle cable linkage stud
GM throttle linkage stud to attach your GM throttle cable to the throttle linkage arm of the Holley carburetor. Installs into the large upper hole on the carburetors throttle linkage arm and requires a bushing to space the hole. 7/32" diameter.

33H-20-37$7.99
Click to enlargeGM Turbo 350 kickdown cable stud
This stud mounts the GM Turbo 350 kick down cable to the Holley carburetors throttle linkage arm. Slips into the cables slider.

33H-20-40$7.99
Click to enlargethrottle cable ball stud assortment
A ball stud throttle stud assortment. Provides several ball sizes and stud sizes for various non-GM cables. Attaches to the Holley carburetors throttle linkage arm, in the large upper hole. Requires a hole bushing for installation.

33H-20-2$14.99
Click to enlargeSee more carbs and manifolds Click Here!
Check out our complete selection of Holley, Edelbrock, Demon and Proform carburetors. If you need an intake manifold we have all the Edelbrock, Weiand, Holley and Professional Products intakes.


We welcome CANADIAN customers! For ordering information, click on "Orders To Canada" at the top left side of this page.

PAYMENT METHODS: PayPal, Visa, Mastercard, Discover, American Express, money orders.

ecommerce provided by Yahoo! Small Business