RPM Air-Gap NASCAR Edition

Edelbrock 75613 RPM Air-Gap NASCAR Edition intake manifold.

Special NASCAR Edition features a black powder coated finish.

Designed for 1975 and older Chevy big block engines with oval port cylinder heads.

Power band from 1500-6500 rpm.

The Air-Gap design features an open air space that separates the runners from the hot engine oil resulting in a cooler, denser charge for more power.

Includes rear water outlets, two distributor clamp locations and nitrous bosses.

Accepts all late model alternator and A/C brackets for street use.

Fits square bore Holley, Edelbrock, Carter, Proform, Quick Fuel and Demon carburetors.

Carb pad height is 5.22".

Tallest point is 6.0".

Port exit dimensions are 1.60" by 1.94".

TECH NOTES: No provisions for EGR, exhaust heated chokes or exhaust crossover. Will not fit under the stock hood of Corvette, 1964-1967 Chevelle, or 1967-1981 Camaro.

Can be matched up with Edelbrock's Victor Series black powder coated valve covers, breathers and air cleaners, all available on this website.

Edelbrock 75613 RPM Air-Gap NASCAR Edition intake manifold EDELBROCK-75613$399.97

Click to enlargeIntake manifold gaskets for Edelbrock 75613 intake
Edelbrock 7203 intake manifold gaskets.

Designed for the Edelbrock 75613 intake manifold shown above.

Edelbrock matched for optimum flow and performance.

MP-2N Micropore technology.

Impervious to most chemicals.

Synthetic fiber composite provides a high recovery under load.

When compressed, the gasket will conform to any perfections on the sealing surface.

Nitrile bead around each port opening.

4-EDE-7203$29.97
Click to enlargeIntake manifold bolts for Edelbrock 75613 intake
Intake manifold bolts for the Edelbrock 75613 intake manifold shown above.

Black-oxide coated chrome moly bolts are rated at 170,000 psi.

Precision-machined for optimum thread engagement.

Wide-area flange for better load distribution.

Precision-rolled threads, which prevent galling, while promoting more consistent torque loading.

Washers included.

4AED-135-2001$39.97
Click to enlargeStainless intake manifold bolts for Edelbrock 75613 intake
Stainless intake manifold bolts for the Edelbrock 75613 intake manifold shown above.

ARP stainless steel intake manifold bolts are 15 percent stronger than Grade 8 steel bolts.

Wide-area flange for better load distribution.

Precision-rolled threads, which prevent galling and promote more consistent torque loading.

Corrosion and heat-resistant and come highly polished.

Includes stainless washers.

8ARP-435-2001$49.97

PayPal Acceptance Mark




We welcome CANADIAN customers! For ordering information, click on "Orders To Canada" at the top left side of this page.

We will not ship to freight forwarding - expediting companies.

PAYMENT METHODS: PayPal, Visa, Mastercard, Discover, American Express, money orders.

ecommerce provided by Yahoo! Small Business