Click to enlarge

RPM Air Gap Intake With Endurashine Finish

Edelbrock 75614 Edelbrock Performer RPM Air Gap intake manifold.

The Endurashine finish provides a brilliant, chrome like shine without the constant polishing maintenance of chrome or polished aluminum.

A three step Vacuum Metalizing Process, base coat, aluminum coat and clear top coat to enhance abrasion and chemical resistance.

Resists discoloration from heat.

The RPM Air Gap intake manifold is designed for street big blocks with oval port cylinder heads.

The air gap design features an open air space that separates the runners from the hot engine oil resulting in a cooler, denser charge for more power.

Includes rear water outlets, two distributor clamp locations and nitrous bosses.

Set up for square bore Holley, Edelbrock, Demon and Carter carburetors.

Recommend 650 cfm to 800 cfm carburetors.

Port dimensions aare 1.94" tall by 1.60" wide.

Manifold height is 4.45" in the front and 6.0" in the rear.

No EGR provisions, street legal for pre-emissions equipped engines and vehicles.

Edelbrock 75614 Performer RPM Air Gap intake manifold EDELBROCK-75614$379.97

Click to enlargeIntake manifold gaskets for Edelbrock 75614 intake
Edelbrock 7203 intake manifold gaskets.

Designed for the Edelbrock 75614 intake manifold shown above.

Edelbrock matched for optimum flow and performance.

MP-2N Micropore technology.

Impervious to most chemicals.

Synthetic fiber composite provides a high recovery under load.

When compressed, the gasket will conform to any perfections on the sealing surface.

Nitrile bead around each port opening.

3-EDE-7203$29.97
Click to enlargeIntake manifold bolts for Edelbrock 75614 intake
Intake manifold bolts for the Edelbrock 75614 intake manifold shown above.

Black-oxide coated chrome moly bolts are rated at 170,000 psi.

Precision-machined for optimum thread engagement.

Wide-area flange for better load distribution.

Precision-rolled threads, which prevent galling, while promoting more consistent torque loading.

Washers included.

3AED-135-2001$39.97
Click to enlargeStainless manifold intake bolts for Edelbrock 75614 intake
Stainless intake manifold bolts for the Edelbrock 75614 intake manifold shown above.

ARP stainless steel intake manifold bolts are 15 percent stronger than Grade 8 steel bolts.

Wide-area flange for better load distribution.

Precision-rolled threads, which prevent galling and promote more consistent torque loading.

Corrosion and heat-resistant and come highly polished.

Includes stainless washers.

9ARP-435-2001$49.97

PayPal Acceptance Mark




We welcome CANADIAN customers! For ordering information, click on "Orders To Canada" at the top left side of this page.

We will not ship to freight forwarding - expediting companies.

PAYMENT METHODS: PayPal, Visa, Mastercard, Discover, American Express, money orders.

ecommerce provided by Yahoo! Small Business