Click to enlargeMSD Street Pro-Billet Distributor

MSD 8361 Street Pro Billet distributor.

Designed for Chevrolet small block and big block engines.

A popular route for people looking for proven race performance for their street cars.

A vacuum advance canister provides economy and the proven MSD mechanical advance gives you the opportunity to dial in a timing curve to fit your needs.

Oversized steel shaft is QPQ coated for low friction and rides in a sealed ball bearing at the top of the distributor with an extra long sintered bushing at the bottom.

This combination keeps the shaft steady creating accurate spark delivery at any rpm.

The Pro-Billet relies on a magnetic pickup to trigger the MSD Ignition Control which delivers the powerful sparks to the coil.

The magnetic pickup is extremely accurate and never needs adjusting.

Supplied with a cap and rotor.

TECH NOTE: Must be used with an MSD 6A or 6AL Ignition shown below.


MSD 8361 Street Pro Billet Distributor for Chevrolet MSD-8361$271.97

Click to enlargeMSD 6A ignition control for MSD 8361 distributor
MSD Digital 6A Ignition Control.

Designed for use with the MSD 8361 distributor shown above.

Wiring is routed out one end of the unit through a sealed and locking connector. This eases installation and keeps your wiring looking neat and clean.

Built in LED for systems check.

Includes wiring harness and components needed for installation.

Works with 4, 6 or 8 cylinder engines with a 12 volt negative electrical system.

Accepts trigger signals from points, amplifier or magnetic pickups.

CD Voltage Output to Coil: 520-540 V

Current Draw: 0.7 amps per 1,000 rpm

Spark Output (millijoules): 135-145 Millijoules

Minimum Operating Voltage: 12 V

Maximum Operating Voltage: 15 V

Length (in): 8.000 in.

Height (in): 2.250 in.

Width (in): 4.000 in.

Warranty: 1-year

8361-MSD-6201$219.97
Click to enlargeMSD 6AL ignition control for MSD 8361 distributor
MSD 6425 Digital 6AL ignition control.

Designed for use with the MSD 8361 distributor.

Rev limiter on top with rotary dials to set rev limit in 100 rpm increments. Protect your engine from overrev damage. No rev chips to buy.

Wiring is routed out one end of the unit through a sealed and locking connector. This eases installation and keeps your wiring looking neat and clean.

Built in LED for systems check.

Includes wiring harness and components needed for installation.

Works with 4, 6 or 8 cylinder engines with a 12 volt negative electrical system.

Accepts trigger signals from points, amplifier or magnetic pickups.

CD Voltage Output to Coil: 520-540 V

Current Draw: 0.7 amps per 1,000 rpm

Spark Output (millijoules): 135-145 Millijoules

Minimum Operating Voltage: 12 V

Maximum Operating Voltage: 15 V

Length (in): 8.000 in.

Height (in): 2.250 in.

Width (in): 4.000 in.

Warranty: 1-year

8361-MSD-6425$254.97
Click to enlargeMSD 8223 coil for MSD 8361 distributor
MSD 8223 Blaster 3 ignition coil.

Designed for use with the MSD 8361 distributor shown above.

Extra tall tower design to improve the coil wire attachment and spark isolation.

Supplied with a 90 degree terminal and boot.

Turns ratio is 100:1.

Primary resistance is .7 ohms.

Secondary resistance is 4.5K ohms.

Inductance is 8 MH.

Maximum voltage is 45,000 volts.

Peak current is 140 MA.

Spark duration is 350 US.

If you are looking to upgrade your stock coil or want to complement the performance of your MSD 6 Series Ignition, the Blaster 3 coil is the right choice.

8361-MSD-8223$54.97
Click to enlargeMSD Spark Plug Wires for MSD 8361 Distributor
Designed for use with the MSD 8361 distributor shown above.

Custom cut for Chevy small block engines and pre-assembled, ready to install.

The MSD Super Conductor is the ultimate performance wire!

It's extremely low resistance combined with the ability to suppress Electro Magnetic interference is a combination that defies the common laws of physics.

Less resistance means more energy is going to make it to the spark plugs to ignite the air/fuel mixture.

Helically wound copper alloy conductor core features Dupont Kevlar material for increased tensile strength.

Copper alloy conductor has a resistance value of less than 50 ohms per foot of wire! This ensures that the most energy possible makes it to the plugs.

Ferro-magnetic impregnated center core creates and effective EMI choke.

Forty feet of conductor is wound into a single foot of wire to high EMI Suppression.

8.5mm jacket.

Red in color with grey boots.

Extra heavy glass braid.

High dielectric insulator.

MSD Dual Crimp Terminals have large crimp tabs to grip the sleeve with separate crimp tabs for the conductor.

Snap lock spark plug grip.

The best spark plug wire your money can buy!

8361MSD35659$94.97
Click to enlargeMSD Big Block Spark Plug Wires for MSD 8361 Distributor
Designed for use with the MSD 8361 distributor shown above.

Custom cut for Chevy BIG BLOCK engines and pre-assembled, ready to install.

The MSD Super Conductor is the ultimate performance wire!

It's extremely low resistance combined with the ability to suppress Electro Magnetic interference is a combination that defies the common laws of physics.

Less resistance means more energy is going to make it to the spark plugs to ignite the air/fuel mixture.

Helically wound copper alloy conductor core features Dupont Kevlar material for increased tensile strength.

Copper alloy conductor has a resistance value of less than 50 ohms per foot of wire! This ensures that the most energy possible makes it to the plugs.

Ferro-magnetic impregnated center core creates and effective EMI choke.

Forty feet of conductor is wound into a single foot of wire to high EMI Suppression.

8.5mm jacket.

Red in color with grey boots.

Extra heavy glass braid.

High dielectric insulator.

MSD Dual Crimp Terminals have large crimp tabs to grip the sleeve with separate crimp tabs for the conductor.

Snap lock spark plug grip.

The best spark plug wire your money can buy!

8361MSD35379$99.97

PayPal Acceptance Mark




We welcome CANADIAN customers! For ordering information, click on "Orders To Canada" at the top left side of this page.

We will not ship to freight forwarding - expediting companies.

PAYMENT METHODS: PayPal, Visa, Mastercard, Discover, American Express, money orders.

ecommerce provided by Yahoo! Small Business