Click to enlargeMSD Billet Distributor

MSD 8580 MSD Distributor.

Fits Ford 460 429 400 351M 351C.

Features an easy to adjust mechanical advance assembly.

The assembly is fine blanked from chrome moly steel, tig welded for strength plus receives a QPQ coating.

The precision weights glide on nylon bushings for smooth advancement and different springs and stop bushings are supplied so a variety of advance curves can be tuned.

Cap and rotor is supplied.

The steel shaft that spins the advance and reluctor receives a friction reducing coating plus is guided by a sealed ball bearing and long sintered bushing. This combination provides stable timing signals and spark delivery at any rpm.

Triggering is handled by MSD's race proven, maintenance free magnetic pickup.

NOTE: Must be used with MSD 6A or 6AL Ignition Controls.

Will not clear some factory style Shaker Hood Scoops.


MSD 8580 billet distributor 351M 351C 400 429 460 distributor MSD-8580$281.97

Click to enlargeMSD Blaster 3 Coil for MSD 8580 Distributor
MSD Blaster 3 ignition coil.

Designed for use with the MSD 8580 distributor shown above.

Extra tall tower design to improve the coil wire attachment and spark isolation.

Supplied with a 90 degree terminal and boot.

Turns ratio is 100:1.

Primary resistance is .7 ohms.

Secondary resistance is 4.5K ohms.

Inductance is 8 MH.

Maximum voltage is 45,000 volts.

Peak current is 140 MA.

Spark duration is 350 US.

If you are looking to upgrade your stock coil or want to complement the performance of your MSD 6 Series Ignition, the Blaster 3 coil is the right choice.

8580-MSD-8223$54.97
Click to enlargeMSD 6A Ignition for MSD 8580 Distributor
MSD Digital 6A Ignition Control.

Designed for use with the MSD 8580 distributor shown above.

Wiring is routed out one end of the unit through a sealed and locking connector.

This eases installation and keeps your wiring looking neat and clean.

Built in LED for systems check.

Includes wiring harness and components needed for installation.

Works with 4, 6 or 8 cylinder engines with a 12 volt negative electrical system.

Accepts trigger signals from points, amplifier or magnetic pickups.

CD Voltage Output to Coil: 520-540 V

Current Draw: 0.7 amps per 1,000 rpm

Spark Output (millijoules): 135-145 Millijoules

Minimum Operating Voltage: 12 V

Maximum Operating Voltage: 15 V

Length (in): 8.000 in.

Height (in): 2.250 in.

Width (in): 4.000 in.

Warranty: 1-year

8580-MSD-6201$219.97
Click to enlargeMSD 6AL Ignition for MSD 8580 Distributor
MSD 6425 Digital 6AL ignition control.

Designed for use with the MSD 8580 distributor.

Rev limiter on top with rotary dials to set rev limit in 100 rpm increments.

Protect your engine from overrev damage.

No rev chips to buy.

Wiring is routed out one end of the unit through a sealed and locking connector. This eases installation and keeps your wiring looking neat and clean.

Built in LED for systems check.

Includes wiring harness and components needed for installation.

Works with 4, 6 or 8 cylinder engines with a 12 volt negative electrical system.

Accepts trigger signals from points, amplifier or magnetic pickups.

CD Voltage Output to Coil: 520-540 V

Current Draw: 0.7 amps per 1,000 rpm

Spark Output (millijoules): 135-145 Millijoules

Minimum Operating Voltage: 12 V

Maximum Operating Voltage: 15 V

Length (in): 8.000 in.

Height (in): 2.250 in.

Width (in): 4.000 in.

Warranty: 1-year

8580-MSD-6425$254.97
Click to enlargeMSD Spark Plug Wires for MSD 8580 Distributor
MSD Super Conductor spark plug wires.

Designed for use with the MSD 8580 distributor shown above.

Pre-assembled for Ford 460, Ford 429, Ford 400, Ford 390, Ford 352, Ford 351M, Ford 351C.

8.5mm insulator.

Copper alloy conductor with a resistance value of less than 50 ohms per foot for superior spark energy.

Ferro-magnetic impregnated core creates an effective EMI choke.

Forty feet of conductor is wound into a single foot of wire for high EMI suppression.

Conductor core features Dupont Kevlar material for increased tensile strength.

Red in color with grey boots.

Includes coil wire.

8580-MSD-35389$124.97

PayPal Acceptance Mark




We welcome CANADIAN customers! For ordering information, click on "Orders To Canada" at the top left side of this page.

We will not ship to freight forwarding - expediting companies.

PAYMENT METHODS: PayPal, Visa, Mastercard, Discover, American Express, money orders.

ecommerce provided by Yahoo! Small Business