Click to enlargeMSD Pro-Billet Ford FE Distributor

MSD 8594 MSD Pro-Billet Distributor.

Fits Ford FE engines 352, 360, 390, 427 or 428.

A magnetic pickup triggers your MSD Ignition Control accurately at any rpm.

Above this pickup the mechanical advance assembly is positioned so it can be adjusted without disassembling the distributor.

A specially ground advance cam is tig welded to the 9/16" hardened shaft.

The weight pins are staked and tig welded to the advance plate.

Supplied with cap and rotor.

TECH NOTE: Must be used with an MSD 6A or 6AL Ignition Control.


MSD 8594 Ford FE Pro-Billet distributor MSD-8594$312.97

Click to enlargeMSD 8223 Coil for MSD 8594 Distributor
MSD 8223 Blaster 3 ignition coil.

Designed for use with the MSD 8594 distributor shown above.

Extra tall tower design to improve the coil wire attachment and spark isolation.

Supplied with a 90 degree terminal and boot.

Turns ratio is 100:1.

Primary resistance is .7 ohms.

Secondary resistance is 4.5K ohms.

Inductance is 8 MH.

Maximum voltage is 45,000 volts.

Peak current is 140 MA.

Spark duration is 350 US.

If you are looking to upgrade your stock coil or want to complement the performance of your MSD 6 Series Ignition, the Blaster 3 coil is the right choice.

8594-MSD-8223$54.97
Click to enlargeMSD 6A for MSD 8594 Distributor
MSD Digital 6A Ignition Control.

Designed for use with the MSD 8594 distributor shown above.

Wiring is routed out one end of the unit through a sealed and locking connector.

This eases installation and keeps your wiring looking neat and clean.

Built in LED for systems check.

Includes wiring harness and components needed for installation.

Works with 4, 6 or 8 cylinder engines with a 12 volt negative electrical system.

Accepts trigger signals from points, amplifier or magnetic pickups.

CD Voltage Output to Coil: 520-540 V

Current Draw: 0.7 amps per 1,000 rpm

Spark Output (millijoules): 135-145 Millijoules

Minimum Operating Voltage: 12 V

Maximum Operating Voltage: 15 V

Length (in): 8.000 in.

Height (in): 2.250 in.

Width (in): 4.000 in.

Warranty: 1-year

8594-MSD-6201$219.97
Click to enlargeMSD 6AL for MSD 8594 Distributor
MSD 6425 Digital 6AL ignition control.

Designed for use with the MSD 8594 distributor.

Rev limiter on top with rotary dials to set rev limit in 100 rpm increments.

Protect your engine from overrev damage.

No rev chips to buy.

Wiring is routed out one end of the unit through a sealed and locking connector. This eases installation and keeps your wiring looking neat and clean.

Built in LED for systems check.

Includes wiring harness and components needed for installation.

Works with 4, 6 or 8 cylinder engines with a 12 volt negative electrical system.

Accepts trigger signals from points, amplifier or magnetic pickups.

CD Voltage Output to Coil: 520-540 V

Current Draw: 0.7 amps per 1,000 rpm

Spark Output (millijoules): 135-145 Millijoules

Minimum Operating Voltage: 12 V

Maximum Operating Voltage: 15 V

Length (in): 8.000 in.

Height (in): 2.250 in.

Width (in): 4.000 in.

Warranty: 1-year

8594-MSD-6425$254.97

PayPal Acceptance Mark




We welcome CANADIAN customers! For ordering information, click on "Orders To Canada" at the top left side of this page.

We will not ship to freight forwarding - expediting companies.

PAYMENT METHODS: PayPal, Visa, Mastercard, Discover, American Express, money orders.

ecommerce provided by Yahoo! Small Business