Click to enlargeMSD BLASTER 2 High Vibration Coil

MSD 8222 Blaster High Vibration coil.

The MSD High Vibration coil is the same as Blaster 2 except that the High Vibration model is for use on off-road or dirt track, marine applications, ect. where much rough vibration is encountered.

Completely potted with a premium grade epoxy , protects internal components from vibration.

Will fit stock coil brackets.

Works on vehicles with a distributor that requires a remote mounted coil.

TECH NOTE: Will not work on GM HEI equiped vehicles without a distributor cap modification.

Maximum voltage: 45,000 volts.

Turns ratio is 100:1.

Primary resistance is .7 ohms.

Secondary resistance is 4.5K.

Inductance is 8 MH.

Peak current is 140 MA.

Spark duration is 350 US.

WARRANTY: MSD Ignition warrants its products to be free from defects in material and workmanship under normal use, if properly installed, for a period of one year from the date of purchase. Contact MSD's customer service department for an RMA number before returning an ignition.


MSD 8222 Blaster high vibration coil MSD-8222$59.97

Click to enlargeMSD 8217 coil wire retainer for MSD 8222 coil
MSD 8217 coil wire retainer.

Fits the MSD 8222 coil shown above.

The MSD 8217 coil wire retainer holds the boot securely in the coil.

The lower portion of the retainer snaps around the body of the coil under the flange and is held in place with a nylon tie wrap.

With this combination the coil wire cannot vibrate loose during severe racing conditions.

The MSD 8217 coil wire retainer fits most of the MSD Blaster coils (except the Blaster 3 coil) and fits most aftermarket canister type coils as well.

(Coil not included.)

1-MSD-8217$27.97
Click to enlargeMSD 8213 coil bracket for MSD 8222 coil
MSD 8213 MSD coil bracket.

Fits the MDS 8222 coil shown above.

The MSD 8213 coil bracket offers easy, universal mounting for standard size ignition coils up to 2.25" in diameter.

The bracket uses a bolt and nut combination instead of the easily stripped self tapping screw common on other brand brackets.

2-MSD-8213$14.97
coil bracket for MSD 8222 coil
Flat mount coil bracket.

Works well with the MSD 8222 coil shown above.

Works great for mounting your ignition coil on the firewall or inner fender.

Made of lightweight anodized aluminum.

ALLSTAR-81324$29.97

PayPal Acceptance Mark




We welcome CANADIAN customers! For ordering information, click on "Orders To Canada" at the top left side of this page.

We will not ship to freight forwarding - expediting companies.

PAYMENT METHODS: PayPal, Visa, Mastercard, Discover, American Express, money orders.

ecommerce provided by Yahoo! Small Business