Painless Performance 10102 Painless 12-circuit universal wiring harness.
Dash mount ignition key location.
Includes the GM column mounted turn signal switch plugs and terminals, but does not included the GM column mounted ignition switch plugs.
Prewired plugs for headlights and the dimmer switch.
This kit covers the most basic chassis wiring needs. Set up for dash mounted ignition key.
Kit includes more than enough wire and terminals, etc, to do the job. You route and cut to suit your vehicle's needs.
Number of Circuits: 12 Fuses w/ Horn Relay
Harness Length: Universal
Fuse Type: Blade & Maxi Fuse
Firewall Passthrough: Grommet
Color Code Based: GM
Connectors Included: GM Steering Column Turn Switch, Two
Headlight Pigtails, 10SI & 12 SI Alternator, Dimmer Switch
Circuit Designations: Printed on Wires
THIS WIRING HARNESS HAS CIRCUITS FOR:
Headlight Switch- Power to headlight switch. Power wires out of headlight switch to head light dimmer switch, tail lights, dash lights and park lights.
Dimmer Switch wires include power from headlight switch and power out to low and high beam headlights.
Wiper Switch- Power to wiper switch. You will need to retain the wires between the wiper switch and your wiper motor.
Turn Signal Switch- Power into and out of your column mounted turn signal switch. Also included in this kit are both styles of GM turn switch connectors. Note: these will connect to most aftermarket and factory steering columns.
Ignition Switch- Power into and out of to fuse block (ignition, crank and accessory)
Brake Switch- Power into and out of brake switch. This includes a third brake light wire.
Courtesy Lights- Power and ground circuits for dome light activation.
Alternator- Charge wire and alternator field activation wires. (Most alternators can easily be wired up to this Painless harness). Included in kit is a high output alternator wire that allows you to use up to a 140 Amp alternator.
Horn- 40 Amp horn relay mounted to fuseblock
Radio- Harness includes constant B+ (for preset memory) and ignition hot circuits for any aftermarket or factory radio.
Starter- Crank signal wire for starter solenoid.
ENGINE SECTION WIRING INCLUDING:
coil to tach signal
A/C compressor clutch control wire
HEADLIGHT SECTION WIRING INCLUDING:
right and left high and low beam headlights
TAIL SECTION WIRING INCLUDING:
turn signal lights
fuel gauge sender
third brake light
DASH PANEL SECTION INCLUDING:
ALSO INCLUDED IN THIS KIT:
fuseblock mounting bracket
4 inch zip ties
70 Amp maxi fuse
a large assortment of crimp style connectors
Most important of all an illustrated installation manual that equips you with the needed information to install the harness to your vehicle. If you get stuck during the installation just give the Painless Performance tech line a call. They have an immense data base of vehicle specific information.
We welcome CANADIAN customers! For ordering information, click on "Orders To Canada" at the top left side of this page.
We will not ship to freight forwarding - expediting companies.
PAYMENT METHODS: PayPal, Visa, Mastercard, Discover, American Express, money orders.