Click to enlarge

Painless Universal Truck Wiring Harness

Painless 10104 universal truck wiring harness can be used in just about any pickup where basic wiring is needed.

Ample wire lengths make this kit especially suited for everything including trucks with long beds and extended cabs.

NOTE: For use with non-GM steering column applications.

Number of Circuits: 21 Fuses w/ Horn Relay and Maxi Fuse

Harness Length: Universal

Fuse Type: Blade & Maxi Fuse

Firewall Passthrough: Grommet

Color Code Based: GM

Connectors Included: GM Steering Column Turn Switch, Two Headlight Pigtails, 10SI & 12 SI Alternator, Dimmer Switch Circuit Designations: Printed on Wires

THIS HARNESS INCLUDES WIRING FOR:

Headlight Switch- Power to headlight switch. Power wires out of headlight switch to head light dimmer switch, tail lights, dash lights and park lights.

Dimmer Switch wires include power from headlight switch and power out to low and high beam headlights. Wiper Switch- Power to wiper switch. You will need to retain the wires between the wiper switch and your wiper motor.

Turn Signal Switch- Power into and out of your column mounted turn signal switch. Also included in this kit are both styles of GM turn switch connectors. Note: these will connect to most aftermarket and factory steering columns.

Ignition Switch- Power into and out of to fuse block (ignition, crank and accessory)

Brake Switch- Power into and out of brake switch. This includes a third brake light wire.

Courtesy Lights- Power and ground circuits for dome light activation.

Alternator- Charge wire and alternator field activation wires. (Most alternators can easily be wired up to this Painless harness). Included in kit is a high output alternator wire that allows you to use up to a 140 Amp alternator.

Horn- 40 Amp horn relay mounted to fuse block

Radio- Harness includes constant B+ (for preset memory) and ignition hot circuits for any aftermarket or factory radio.

Starter- Crank signal wire for starter solenoid.

ENGINE SECTION WIRING INCLUDING:

electric choke

coil power

coil to tach signal

oil pressure

engine temperature

A/C compressor clutch control wire

HEADLIGHT SECTION WIRING INCLUDING:

right and left high and low beam headlights

turn signals

park lights

TAIL SECTION WIRING INCLUDING:

tail lights

brake lights

turn signal lights

fuel gauge sender

third brake light

reverse lights

DASH PANEL SECTION WIRING INCLUDING:

fuel

temperature

oil pressure

voltage

tachometer

speedometer

high beam and turn indicators

gauge illumination

ALSO INCLUDED IN THE KIT:

fuse block mounting bracket

rubber grommet

4 inch zip ties

70 Amp maxi fuse

large assortment of crimp style connectors

Most important of all an illustrated installation manual that equips you with the needed information to install the harness to your vehicle. If you get stuck during the installation just give the Painless Performance tech line a call. They have an immense data base of vehicle specific information.

Painless Performance 10104 universal pickup truck wiring harness 12 circuit PAINLESS-PERFORMANCE-10104$452.97
PayPal Acceptance Mark




We welcome CANADIAN customers! For ordering information, click on "Orders To Canada" at the top left side of this page.

We will not ship to freight forwarding - expediting companies.

PAYMENT METHODS: PayPal, Visa, Mastercard, Discover, American Express, money orders.

ecommerce provided by Yahoo! Small Business