Painless 10112 wiring harness.
1963 Chevy truck wiring harness.
1964 Chevy truck wiring harness.
1965 Chevy truck wiring harness.
1966 Chevy truck wiring harness.
1963 GMC truck wiring harness.
1964 GMC truck wiring harness.
1965 GMC truck wiring harness.
1966 GMC truck wiring harness.
This 12-circuit kit includes pre-terminated connectors to the harness for the wiper motor, dimmer switch, brake switch, wiper switch, headlight switch, horn, dash light sockets, warning light sockets.
Kit includes alternator pigtail with connector installed. This harness supports the use of single or dual dash turn signal indicators.
HEADLIGHT SWITCH--Power to headlight switch. Power wires out of the headlight switch to the headlight dimmer switch, tail lights, dash lights and park lights.
DIMMER SWITCH wires include power from the headlight switch and power out to low and high beam headlights.
WIPER SWITCH--Power to wiper switch and wires between the wiper switch and the wiper motor.
TURN SIGNAL SWITCH--Power into and out of your column mounted turn signal switch. Also included in this kit are both sytles of GM turn switch connectors. These will also connect to most aftermarket and factory steering columns.
IGNITION SWITCH--Power into and out of to the fuse block (ignition, crank, and accessory).
BRAKE SWITCH--Power into and out of the brake switch.
COURTESY LIGHTS--Power and ground circuits for dome light and activation.
ALTERNATOR--Charge wire and alternator field activation wires. Most alternators can easily be wired up to this Painless harness.
HORN--40 amp horn relay mounted to the fuse block.
RADIO--Harness includes constant B+ (for preset memory) and ignition hot circuits for any aftermarket or factory radio.
STARTER-Crank signal wire for starter solenoid.
ENGINE SECTION WIRING INCLUDING:
coil to the tach signal
A/C compressor clutch control wire
HEADLIGHT SECTION WIRING INCLUDING:
right and left high and low beam headlights
TAIL SECTION WIRING INCLDING:
turn signal lights
fuel gauge sender
DASH PANEL SECTION WIRING INCLUDING:
high beam and turn indicators
ALSO INCLUDED IN THE KIT:
fuse block mounting bracket
4 inch zip ties
70 amp maxi fuse
large assortment of crimp style connectors
Most important of all, illustrated installation manual that equips you with the needed infromation to install the harness to your vehicle. If you get stuck during the isntallation, just give the Painless tech line a call. They have an immnese data base of vehicle specific information.
GENERAL TECH NOTES: If you plan to use an electric cooling fan, make sure to purchase a cooling fan relay kit such as Painless part number 30114 or 30115. If you plan on installing an electric fuel pump make sure to purchase a fuel pump relay kit such as Painless part number 50102 or 30131.
HOURS: 11:00 am to 6:00 pm Monday - Friday Eastern Standard Time
We welcome CANADIAN customers! For ordering information, click on "Orders To Canada" at the top left side of this page.
We will not ship to freight forwarding - expediting companies.
PAYMENT METHODS: PayPal, Visa, Mastercard, Discover, American Express, money orders.