Click to enlarge

Painless Universal 18-Circuit Wiring Harness

Painless Performance 10202 Painless universal 18-circuit wiring harness.

Dash mounted key.

The Painless 10202 18 Circuit kit allows you to add accessories to the basic wiring such as power windows, door locks, etc.

This kit does NOT include the GM column mounted ignition switch plugs but it does include the GM column mounted turn signal switch plugs and terminals.

Number of Circuits: 18 Fuses w/ Horn Relay & Maxi Fuse

Harness Length: Universal

Fuse Type: Blade & Maxi Fuse

Firewall Passthrough: Grommet

Color Code Based: GM

Connectors Included: GM Steering Column Turn Switch, Two

Headlight Pigtails, 10SI & 12 SI Alternator, Dimmer Switch

Circuit Designations: Printed on Wires

THIS HARNESS HAS CIRCUITS FOR:

Headlight Switch- Power to headlight switch. Power wires out of headlight switch to head light dimmer switch, tail lights, dash lights and park lights.

Dimmer Switch wires include power from headlight switch and power out to low and high beam headlights.

Wiper Switch- Power to wiper switch. You will need to retain the wires between the wiper switch and your wiper motor.

Turn Signal Switch- Power into and out of your column mounted turn signal switch. Also included in this kit are both styles of GM turn switch connectors. Note: these will connect to most aftermarket and factory steering columns.

Ignition Switch- Power into and out of to fuse block (ignition, crank and accessory)

Brake Switch- Power into and out of brake switch. This includes a third brake light wire.

Courtesy Lights- Power and ground circuits for dome light activation.

Alternator- Charge wire and alternator field activation wires. (Most alternators can easily be wired up to this

Painless harness). Included in kit is a high output alternator wire that allows you to use up to a 140 Amp alternator.

Horn- 40 Amp horn relay mounted to fuseblock

Radio- Harness includes constant B+ (for preset memory) and ignition hot circuits for any aftermarket or factory radio. Also included are two pairs of speaker wires.

Starter- Crank signal wire for starter solenoid.

ENGINE SECTION WIRING INCLUDING:

electric choke

coil power

coil to tach signal

oil pressure

engine temperature

A/C compressor clutch control wire

HEADLIGHT SECTION WIRING INCLUDING:

right and left high and low beam headlights

turn signals

park lights

TAIL SECTION WIRING INCLUDING:

tail lights

brake lights

turn signal lights

fuel gauge sender

third brake light

reverse lights

DASH PANEL SECTION WIRES INCLUDING:

fuel

temperature

oil pressure

voltage

tachometer

speedometer

high beam

turn indicators

gauge illumination.

DOOR SECTION WIRING INCLUDING:

power windows

power door locks

ACCESSORY SECTION WIRING INCLUDING:

cruise control

power antenna

electric fuel pump

cigarette lighter/accessory output

ALSO INCLUDED IN THIS KIT:

fuseblock mounting bracket

rubber grommet

4 inch zip ties

70 Amp maxi fuse

a large assortment of crimp style connectors

Most important of all an illustrated installation manual that equips you with the needed information to install the harness to your vehicle. If you get stuck during the installation just give the Painless Performance tech line a call. They have an immense data base of vehicle specific information.

Painless 10202 universal 18-circuit wiring harness PAINLESS-PERFORMANCE-10202$440.97
PayPal Acceptance Mark




We welcome CANADIAN customers! For ordering information, click on "Orders To Canada" at the top left side of this page.

We will not ship to freight forwarding - expediting companies.

PAYMENT METHODS: PayPal, Visa, Mastercard, Discover, American Express, money orders.

ecommerce provided by Yahoo! Small Business