Click to enlarge

Chevy Orange Oil Pan

Transdapt 9921 oil pan.

4 quart capacity.

O.E.M. style.

Fits 1965-1990 Chevy big blocks. Will not fit the GenV motor.

Includes drain plug.

Trans-Dapt's PerfectMatch Powder Coated OEM Style Oil Pan matches the factory color.

Ideal for accurate restorations, or as a new look for your Chevy powerplant.

The baked on orange powder coating looks far better, and lasts much longer than painted oil pans.

Even more importantly, since they're ready to install, they save you time by eliminating prep and paint work.

Transdapt 9921 Chevy big block oil pan 9921$149.97

Click to enlargeMR. Gasket 6086 Oil Pan Bolts for Transdapt 9921 Oil Pan
MR. Gasket 6086 oil pan bolt kit.

Fits Chevy big block engines.

Works well with the Transdapt 9921 oil pan.

INCLUDES:

Two 1/4 Inch 20 x 3/4 Inch Bolts.

Twenty 5/16 Inch - 18 x 3/4 Inch Bolts.

These oil pan bolt kits have a special smaller-than-standard hex head that is ideal for tight spaces.

Because of the hex flange head design, it will not back into the socket wrench, allowing for easier installation.

Special underhead serrations prevent loosening, and the wide flange head distributes uniform clamping pressure for an ultra gasket seal.

The Grade 5 bolts are zinc plated.

MRG-6086$19.97
Click to enlargeFelpro 1804 Oil Pan Gaskets for Transdapt 9921 Oil Pan
Fel-Pro 1804 oil pan gaskets.

Designed for use with the Transdapt 9921 oil pan.

Fits 1965-1990 Chevy big block engines.

Fel-Pro Felcoid/Plus oil pan gaskets have a fiber sheet core and a latex rubber coating.

The latex aids in sealing potential leakage paths.

The core material resists crushing and splitting while providing excellent blowout resistance.

The lateral stability of the fiber core helps the gasket resist deformation under high vacuum conditions.

The fiber core provides a "stopper" effect when the oil pan is torqued down.

Softer materials sometimes do not provide the "feel" that they've been properly torqued.

The Felcoid/Plus gasket has a distinct solid feel when it is properly torqued.

Felpro-1804$29.97
Click to enlargeFelpro 1884R One Piece Oil Pan Gasket for Transdapt 9921 Oil Pan
Fel-Pro 1884R Chevy big block oil pan gaskets.

Design for use with the Transdapt 9921 oil pan.

One piece molded rubber.

Fits 1965-1990 big blocks.

Fel-Pro one-piece molded silicone rubber oil pan gaskets provide perfect fit and are easier to install.

Includes compression limiter to prevent overtightening, and offer superior heat resistance.

1884R$49.97
Click to enlargeMelling M77 Standard Volume Oil Pump for Trans Dapt 9921 Oil Pan
Melling M77 standard volume oil pump for Chevy big block engines.

Works well with the Trans Dapt 9921 oil pan.

Standard oil volume.

Standard oil pressure.

Uses press fit oil pump pickup tube.

TECH NOTE: Recommend Melling 305S oil pump pickup tube for use with the Trans Dapt 9921 oil pan.

M77$44.97
Click to enlargeMelling M77HV High Volume Oil Pump for Trans Dapt 9921 Oil Pan
Melling M77HV high volume oil pump for Chevy big block engines.

Works well with the Trans Dapt 9921 oil pan.

Approximately 25% higher oil volume than stock.

Standard oil pressure.

Uses press fit oil pump pickup tube.

TECH NOTE: Recommend Melling 305S oil pump pickup tube for use with the Trans Dapt 9921 oil pan.

M77HV$54.97
Click to enlargeMellings 305S Oil Pump Pickup Tube for Transdapt 9921 Oil Pan
Mellings 305S oil pump pickup tube.

Works with Transdapt 9921 oil pan or stock oil pans.

Designed for use with Mellings M77HV high volume oil pump.

Designed for use with Mellings M77 standard volume oil pump.

Press fit.

3/4" tube diameter.

Large open screen area for maximum flow.

TECH NOTE: Not for use with original Corvette oil pans.

305S$19.97
Click to enlargeARP 230-7003 Chevy Big Block Oil Pump Stud
ARP 230-7003 oil pump stud for Chevy big block engines.

Works well with Mellings M77 and M77HV oil pumps.

Fastener Style: Stud

Fastener Material: Chromoly

Fastener Finish: Black oxide

Nuts Included: Yes

Nut Style: Hex

Nut Material: Chromoly

Nut Finish: Black oxide

Washers Included: Yes

The best way to ensure that your oil pump will stay in place is to use these oil pump stud kits from ARP.

Rated at 170,000 psi tensile strength.

230-7003$13.97
Click to enlargeARP 135-7901 Heavy Duty Oil Pump Driveshaft
ARP 135-7901 oil pump drive shaft for Chevy big block engines.

Use with high volume or standard volume oil pumps such as Melling M77 or Mellings M77HV.

Hardened Shaft.

Steel Sleeve Material.

ARP has designed these extra heavy-duty shafts to provide you with the reliability you need.

Made from heat-treated chromoly steel, and are larger in diameter than the OEM unit.

The stock plastic pressed on sleeve is replaced with a sturdy metal sleeve that is pinned into place.

This enables the ARP shafts to handle the added torque requirements of increased oil pump capacity or heavy-viscosity lubricants.

Rated at 220,000 psi, these ARP oil pump driveshafts are ready to do the job.

135-7901$22.97

PayPal Acceptance Mark




We welcome CANADIAN customers! For ordering information, click on "Orders To Canada" at the top left side of this page.

We will not ship to freight forwarding - expediting companies.

PAYMENT METHODS: PayPal, Visa, Mastercard, Discover, American Express, money orders.

ecommerce provided by Yahoo! Small Business